Tender Title

Injection Well Liner Supply for Y2025-Y2027

Tender Number

CMIT-PRT-10.30-250040-1

Tender Announcement

Website

ITT package is published through the following mentioned link:

https://www.cnoociraq.com/share/s/XFEOVRU-QreBGb83o8Y3RA

Bulletin No. 1
https://www.cnoociraq.com/share/s/YRTmVLJiSMGY6EcdzaPjow

Bulletin No. 2

https://www.cnoociraq.com/share/s/cdZe33kqQcWtDGUOAqdW2Q

Bulletin No. 3
https://www.cnoociraq.com/share/s/P7r5kKZfTLikneTttMNGbg

All Bulletins during the tender period will be published on the website.

1. Some of the ITT documents have been encrypted for confidentiality reasons, thus; interested Bidders are kindly requested to send an email to the following focal points (“Tender Contacts”) who shall guide them on the next steps on how to access the ITT documents:

abderrahmanezanoun@cmitfod.com

mohamedalhassan@cmitfod.com

waqarhussain@cmitfod.com

mohamedali@cmitfod.com

With copies to:

ex_abderrahm@cnoociraq.com;

ex_waqar.h@cnoociraq.com;

ex_mohamed.a@cnoociraq.com

ex_badreddin@cnoociraq.com;

IMPORTANT:

Bidder MUST be registered on Buy Intelligent and Digitalization System, if not yet registered so Bidder MUST enter https:// www.coibid.com，Click on the tab “Supplier User- Registration” to start registration, once completing the registration process send email to prtinfo@cmitfod.com to validate the registration.

Note: During the registration, please input either the project number or the mention “CNOOC Iraq Limited project” in target project.

Tender Announcement

Section 1 INSTRUCTION TO TENDERERS

Section 2 PROPOSAL CONTENTS AND FORMS

Section 3 TECHNICAL REQUIREMENT

Section 4 SCHEDULE OF COMPENSATION

Section 5 PRO FORMA CONTRACT

ITT Section 1. Clause 9.0

Bid Closing Date: no later than 16:00 (Baghdad Time), on or before January 4, 2026 (“New Closing Date”)

ITT Section 1. Clause 5

All clarification and correspondence from Tenderers must be sent to all aforementioned Tender Contact Emails with official letter.

ITT Section 1. Clause 10.2

SEALED PACKAGE DELIVERY: Original Bid Proposals must be delivered to Iraqi Office

Attention: Mr. Abderrahmane. Z, Mr. Mohamed Al Hassan, Mr. Waqar, Mr. Mohamed Ali, Mr. Badreddine. L

Address: Room 239, FOD Administrative Building. Work Base, CNOOC Camp, Missan Oil Fields.

Tel: +964 781 398 1554, +964 7884960231,  +964 7828810446 , +9647828800342, +964 781 080 8814,

ITT Section 1. Clause 11.1

Tenderer’s bid Proposal shall be irrevocable for a period 360 calendar days (“Bid Validity Period”).

ITT Section 1. Clause 12.1

Fail to meet any of below key factors will lead to disqualification:

1. Scope of Business must be related to the scope of work of the tender.
2. Legal Entity and Qualification of Bidder.
3. Bid proposals are in properly sealed condition with stamp or wax.
4. Bid Proposal Period of Validity shall be as required in this TENDER DATA SHEET (TDS) (aforementioned Clause 11.1).
5. Bid Bond submission & Performance Bond commitment
6. Signed & Stamped Cover Letter (as per Section 2 PROPOSAL CONTENTS AND FORMS, Attachment 2A: Proposal Format of Cover Letter)
7. Price proposal is separate from Technical & Commercial proposal.
8. No significant deviation on ITT requirements.
9. Bidder's Financial Health: Meeting Company’s minimum requirement.
10. Bid Proposal Signed by Bidder’s Legal Representative(s) or Authorized Representative(s)
11. Proposed casing specification and quantity shall meet ITT requirement
12. The production and quality control of proposed casings shall comply with the requirements of the latest ISO 9001 quality management system. Carbon steel casing shall conform to the latest API 5CT, while 25CR casing shall conform to the latest API 5CRA/ISO 13680. The bidder shall provide the corresponding latest valid API or ISO certificate of manufacturer mentioned above
13. The proposed delivery schedule must meet or be shorter than the ITT requirements; otherwise, it will result to disqualification
14. The TPI shall follow the policies and requirements of Iraqi Ministry of Oil
15. Provided that these materials are not manufactured in Iraq, country of origin shall be Europe, Japan and North America or other countries following the Standard Contracting and Procurement Procedures (SCPP) Regulation terms 9.10 & 10.6 approved by the Iraqi Ministry of Oil as follows:

a) Bidders need to demonstrate that the equipment / material supplied from destinations other than their origin(s) meet the Original Equipment Manufacturer' s (OEM) specification and quality standards of the origin(s)

b) Company specify the origin(s) of the required equipment/materials as per MoO / MOC directives (currently including Europe, Japan and North America) and section A above. The definition of origin(s) can be specified as below

Ⅰ. Manufactured or assembled in origin(s)

Ⅱ. Manufactured in non-origin(s) by OEM from origin(s)

Ⅲ. Parts & components from origin(s) but assembled in non-origin(s) authorized by OEM from origin(s).

 16. Company accepts only manufacturers or sole agents which have a valid legal authorization letter (attested by Iraq embassy in the country of origin) from manufacturers. Sole agents should obtain authorization from Manufacturing Parties, attested by Iraqi Embassy located in the countries of manufacturing plants and provide such authorization to Company within twenty (20) working days after Bid Closing Date

17. Bidders shall attach commitment letter within technical proposals with regard to submitting the certificate of origin attested by Iraqi embassy

18. Contractor’s past performance evaluation in Missan Oilfield, only bidders with qualified performance record and new bidders to Missan oilfield shall be considered qualified for this item.

ITT Section 1. Clause15.1

Bid bond: 500,000.00 USD (Half Million US Dollar), The Bid Bond must be presented to Company in a separated and sealed envelope and duly marked and stamped on outer envelope.

The original validity of the bid bond shall be the same as aforementioned Bid Validity Period in Clause 11.1.

Cash Bid Bond will not be accepted from a Chinese Bidder that does not have overseas Bank account.

Tenderers should be advised that Cheques ARE NO LONGER ACCEPTED as a Bid Bonds by Company.

ITT Section 2. Clause3.5

Joint bidding is NOT accepted by Company.

ITT Section 2. Clause 2.7

Tenderers should strictly comply and follow Subcontracting requirements and conditions mentioned in this clause.

ITT Section 1. Clause 26.0

&

ITT Section 2. Clause 3.9

Company prohibits firmly and strictly Collusive Bidding and any kind of collusive behaviors that will be detected and confirmed by Company at its sole discretion.

Tender Fee Amount

There will be no charge for obtaining the tender documents.