BULLETIN No.1
Date: 09/01/2016
Ref No: PRT-2016-0008
Bid No.: CMIT-PRT-10.30-150266
Project Title: Valves for Water Injection System
Subject: Technical Clarification
Dear Bidders,
With respect to the Tender Number as referred in this Bulletin No. 1; Please Kindly take note that we publish the following clarification:
No. |
Questions by bidder |
Answer |
1 |
In the valve list, the provided valve tag number is 15N0 or 1N0, however, it is not clear, please provide the full tag number i.e. 15N03,15N02,1N03 etc. |
Follow the ITT and CMIT-712-PIP-15.03-5006-B_SPECIFICATION FOR VALVES and CMIT-712-PIP-15.03-5005-B_SPECIFICATION FOR PIPING MATERIALS |
2 |
For the flat type gate valve, it need through conduit hole or not? |
Don’t need through conduit hole. |
3 |
Would you please advise us the origin of the required items that will be accepted |
No origin limited, but on the same price condition, the USA or Europe or Japan products are priority. |
4 |
Please supply the Material Take off for the BUS Water Injection Project |
It’s the same as the valve list in the schedule of compensation. Refer to supplement document |
5 |
In the valve list and specification the valve flange is RJ connection, is the RJ the same as RTJ written in API and ANSI? |
Please follow the ITT and Valve specification requirement |
6 |
If the valve flange is RJ or RF type, the mated gasket is ring or flat gasket? |
The gasket or ring should be mated with the flange. |
7 |
Can you supply us with your standard please? |
We don’t supply standard, please refer to the ITT and specification CMIT-712-PIP-15.03-5006-B_SPECIFICATION FOR VALVES |
8 |
Regarding the tender ” Valves for water injection system” we need the following information. each valve: material for trim and for body, connection type design standard.
|
Please according to the specification CMIT-712-PIP-15.03-5006-B_SPECIFICATION FOR VALVES |
9 |
Regarding the subject tender, the manufacturer requires a detailed technical datasheet which is indicating body/bonnet/closure/trim and components material specifications, NACE/SOUR/RT/NDE/3.2/3.1 requirements etc., in order to quote the exact requirement. |
Following the specification CMIT-712-PIP-15.03-5006-B_SPECIFICATION FOR VALVES, if the specification not clear, following the standard of manufacture. |
The bidding close date was extend to January 25, 2016
Please check Material Data Sheet in the following link:
Thanks for your understanding and cooperation.
Regards
_________________________
Mr. Ma Peixin
Manager of Contracts & Procurement Department
CNOOC Iraq Limited